compatible chargers

[PeaUK]

I'm not saying charged much as DJI. I believe DJI products are extremely overpriced for what they are.

I am saying make drones that are as user friendly as DJI products (e.g. automatic WiFi based firmware updates etc so people that do not know anything about IT can own drones too). If Hubsan make their drones more user friendly, then Hubsan's drones will be wanted by more consumers. Those types of tweaks are relatively inexpensive, and yet allow a lot more people to own and enjoy drones.

When you think about it, before Microsoft introduced Windows, computers were sold to a very small market. Windows expanded that market immensely because computers became simple to operate and maintain

[me_23dbbvQyd0]

Hubsan doesn't need to tap in to Dji market.
1. Dji spends tons of money on new technology that's why their drones are expensive. That's how Hubsan fits in, to offer a lower cost alternative.
2. Autel Evo is tapping into Dji market that's why the Evo cost $ 999.99
I wouldn't want to pay $ 900.00 for a Hubsan because they tapped into Dji market.
Who needs nanny sensors.
Zoom that Zino

Completely agree with you... your words explain my tohughts

[me_c3b02jUC5p]

Bonjour perso pour le prix le up610 Pocket 200w est pas mal.

[rmcbride65]

Has anyone figured out if we can use a skyrc IMAX charger for the Zino yet?

[Magnum1956PMQ]

La prise du cordon Hubsan est un satndard batterie 3s, 4 plots.
Mais il n'y a pas de cable de puissance à part, donc je ne peux pas utiliser mon chargeur du 501 Ultimate PRO10.
Ou alors, il faut trafiquer un adaptateur ...
Car en effet, 2h1/2 par batterie c'est pénible !!
La RC ne charge pas vite non plus ...

[rmcbride65]

Bump

[peterkng]

rmcbride65

It is a 3s Lipo battery so you can use any Lipo compatible charger with it. The hard part is setting up an appropriate adapter for the battery plug. If you are not skilled at electrical wiring and do not have the required knowledge to make your own adapter wait a couple of months they will be on ebay just like the double plugs etc... for the 501S

[JanisHemmer]

Yesterday I build a prototype charging plug with some hot glue and it worked perfectly I used my old Imax B6 charger, the LiPo balancing program and charged the battery with 1C in less than 30min. There’s nothing intelligent on that battery except the connector

[rmcbride65]

Yesterday I build a prototype charging plug with some hot glue and it worked perfectly I used my old Imax B6 charger, the LiPo balancing program and charged the battery with 1C in less than 30min. There’s nothing intelligent on that battery except the connector

Very nice. Thank you for this!

[me_23dbbvQyd0]

I'll use this method with a jst-xh board. No modifications to charger adapter, only build a cable jst->power out of charger.
I am sorry, it is italian language...
https://youtu.be/hgcOKBD4qik