Return to home

Post Reply
me_35a75xUiXe
Posts: 4
Joined: Mon Dec 31, 2018 7:53 am

Return to home

Post by me_35a75xUiXe » Tue Jan 01, 2019 4:25 pm

If i have hit the return to home button can i cancel this oncs the zino is on its way back?

woo65
Posts: 63
Joined: Wed Oct 03, 2018 3:02 pm

Re: Return to home

Post by woo65 » Tue Jan 01, 2019 4:29 pm

Yes.

giomangiac
Posts: 2
Joined: Thu Aug 09, 2018 12:58 am

Re: Return to home

Post by giomangiac » Tue Jan 01, 2019 4:31 pm

basta premere brevemente ritorno a casa e il drone si ferma in attesa di altri comandi.

fb_76d73eJwu0
Posts: 7
Joined: Thu Oct 18, 2018 1:51 am

Re: Return to home

Post by fb_76d73eJwu0 » Wed Jan 02, 2019 3:05 pm

Just press the Home button and the Zino will stay in the air.

501Pete
Posts: 130
Joined: Thu Oct 25, 2018 1:06 pm

Re: Return to home

Post by 501Pete » Wed Jan 02, 2019 5:34 pm

me_35a75xUiXe wrote:
Tue Jan 01, 2019 4:25 pm
If i have hit the return to home button can i cancel this oncs the zino is on its way back?
If you select RTH again, you will be prompted whether you wish to cancel or not.
If you select OK, that will cancel the RTH, if you select Cancel, the RTH continues.
You can do this for auto initiated RTH too, i.e on low voltage warning (it can save a n awfully long walk ....)
Attachments
rthcancwel.png
rthcancwel.png (134.45 KiB) Viewed 5886 times

User avatar
irussphone
Posts: 256
Joined: Wed Oct 03, 2018 2:51 pm
Location: TEXAS

Re: Return to home

Post by irussphone » Thu Jan 03, 2019 1:10 pm

It appears on several videos that I have seen on RTH that the Zino maintains whatever the altitude is when you enable RTH or even when it loses signal and starts its own return...instead of going to 10 meters and then RTH. That's good! But if you are too low then 10 meters is all you get on RTH I guess. It seems the lesson would be to keep it higher than your surrounding obstacles at all times.

501Pete
Posts: 130
Joined: Thu Oct 25, 2018 1:06 pm

Re: Return to home

Post by 501Pete » Thu Jan 03, 2019 2:09 pm

irussphone wrote:
Thu Jan 03, 2019 1:10 pm
It appears on several videos that I have seen on RTH that the Zino maintains whatever the altitude is when you enable RTH or even when it loses signal and starts its own return...instead of going to 10 meters and then RTH. That's good! But if you are too low then 10 meters is all you get on RTH I guess. It seems the lesson would be to keep it higher than your surrounding obstacles at all times.
The Zino rises to 10m (above take off altitude) when RTH is invoked. If it is below that it will first rise.
If it is above that it will return at it's current altitude.

Post Reply