H501ss and advanced controller

Post Reply
VictorsHubsan
Posts: 1
Joined: Sat Jan 30, 2021 6:00 am

H501ss and advanced controller

Post by VictorsHubsan » Sat Jan 30, 2021 6:16 am

Hi all.
I have a Hubsan H501ss and the advanced controller.
The transmitter is version H906A version V1.1.6
The Quad is version 501SS. V2.1.16
I am very happy with the drone but I would love to be able to use the (Circle/Orbit Mode)
On the official Hubsan videos it states that with the firmware I have for the transmitter and quad
this mode should be available.
I have seen online that all you have to do is start the quad in GPS mode and press the down button
and it will enter circle mode and I have seen a video online that uses this to enter circle mode and it changes
into that mode.
When I press the down button nothing happens?
I am very wary of updating any of the firmware for the quad or the controller as I have seen online that this can result in
all sorts of problems and as it says in the video if your quad works don't update the firmware!
Has anyone got any advice on what I am doing wrong and how I can get circle/orbit mode to work?
Any advice would be great and here is the link to the official Hubsan video at around 2.30mins she says that with the controller firmware
and quad firmware I have above that this should work.
https://www.youtube.com/watch?v=K2u09f1z7ro&feature=emb_logo
Thank you all and Stay Safe. Victor

Post Reply