GIMBAL ERROR FIX (Thanks Shally@hubsan)

[SkillPig]

NOT FOR THE FAINT HEARTED

So woth help from Hubsans Shally I have fixed the gimbal issue

Turn it all off

Hold the Gimbal GENTLY forward and you will notice on the back of the gimbal there is a cover. Work it off gently whilst not stressing the gimbal. I used tweezers.

Behind this cover is a very small reset button - press it with the tweezers.

Befor you replace the cover fore up the drone and ypur gimbal shpuld be working. Mine is. Im so happy.

[15121437929499C]

Will this reset address the gimbal angle sensor failure, error code 0xC00 that I'm experiencing?

[Magnum1956PMQ]

Good solution !

[me_24733Rj73H]

I cant find any Button... Did you have a picture?

[SkillPig]

Hi dude - here is the link to the video Shally sent me.

https://www.dropbox.com/s/0laqmdqrj2k73g0/Tutorial%20video%20for%20gimbal%20repairing%20.mp4?dl=0

[me_24733Rj73H]

The procedure didn't fix my problem... Thanks for All..

[JudeRomanillos]

I have the same problem, the camera won't move up or down, it is looking down and struggling to move up i dont know the problem, I'd like to open the camera up down motors to check what's wrong..