H122D X4 Storm" bounces"

Post Reply
Posts: 1
Joined: Tue May 22, 2018 10:37 pm

H122D X4 Storm" bounces"

Post by droner53 » Tue May 22, 2018 10:45 pm

Hello, Flying my 122 D for the first time, when I throttle up in small increments the drone does not hover, instead it keeps going up.
If I throttle down to hover it keeps going down until it bounces on the ground. It eventually lands with the props still turning. The calibration feature does not help. All other phases of operation appear to work. Any ideas? Thanks

Posts: 1027
Joined: Mon Apr 16, 2018 10:43 pm

Re: H122D X4 Storm" bounces"

Post by Hubsan-Ailsa » Wed May 23, 2018 9:18 pm

It's normal,because there is no altitude position hold function for the H122D. so the drone will not hover when you release the stick.

Posts: 4
Joined: Sat Jul 07, 2018 8:04 pm

Re: H122D X4 Storm" bounces"

Post by Frosty » Sat Jul 07, 2018 8:12 pm

I too also am finding this to be a small issue. Light throttle feathering in either direction vertically seems to be the best way to "hover" with this model.

User avatar
Posts: 51
Joined: Mon Jul 30, 2018 2:06 pm
Location: Southern US

Re: H122D X4 Storm" bounces"

Post by magicmannst » Sat Aug 11, 2018 6:32 am

watch some racer vids. you'll see why there is no altitude hold.

Posts: 2
Joined: Thu Sep 06, 2018 3:42 pm

Re: H122D X4 Storm" bounces"

Post by Simone » Thu Sep 06, 2018 3:51 pm

Qualcuno sa il perché dopo aver cambiato la scheda , il radiocomando non si associa più ?

Post Reply