Page 1 of 1
HOVER
Posted: Tue Nov 06, 2018 5:07 pm
by stargazer
My H501S moves forward and backward about a foot or two when hovering. How do I stop that? Thanks
Re: HOVER
Posted: Wed Nov 07, 2018 10:40 am
by me_e8ce6fboTX
Hello.
Try a horizontal calibration
Re: HOVER
Posted: Wed Nov 07, 2018 1:19 pm
by stargazer
Thanks. I tried that and it still moves back and forth. Not a real big deal but it was more stable in the first few uses. When I try and do a rotation calibration I get the green lights, then the all yellow flashing together but soon after the red lights come on that circle around. Does that mean the calibration took or it has a fault? It doesnt seem to matter how many times I do it it seems to always end with the red circling lights.
Re: HOVER
Posted: Wed Nov 07, 2018 11:54 pm
by me_e8ce6fboTX
Hello.
Horizontal calibration should be at least 2 times.
https://youtu.be/60PyH9pyJU8
Re: HOVER
Posted: Thu Nov 08, 2018 10:15 am
by stargazer
Thanks for your help!
Re: HOVER
Posted: Sat Nov 17, 2018 10:57 pm
by DanKnoch
It is struggling to lock on to the GPS satellites? If it does not have a good signal, it may be having problems knowing where it is.