HOVER

Post Reply
stargazer
Posts: 11
Joined: Mon Nov 05, 2018 1:08 pm

HOVER

Post by stargazer » Tue Nov 06, 2018 5:07 pm

My H501S moves forward and backward about a foot or two when hovering. How do I stop that? Thanks

me_e8ce6fboTX
Posts: 3
Joined: Thu Oct 11, 2018 2:31 pm

Re: HOVER

Post by me_e8ce6fboTX » Wed Nov 07, 2018 10:40 am

Hello.

Try a horizontal calibration

stargazer
Posts: 11
Joined: Mon Nov 05, 2018 1:08 pm

Re: HOVER

Post by stargazer » Wed Nov 07, 2018 1:19 pm

Thanks. I tried that and it still moves back and forth. Not a real big deal but it was more stable in the first few uses. When I try and do a rotation calibration I get the green lights, then the all yellow flashing together but soon after the red lights come on that circle around. Does that mean the calibration took or it has a fault? It doesnt seem to matter how many times I do it it seems to always end with the red circling lights.

me_e8ce6fboTX
Posts: 3
Joined: Thu Oct 11, 2018 2:31 pm

Re: HOVER

Post by me_e8ce6fboTX » Wed Nov 07, 2018 11:54 pm

Hello.
Horizontal calibration should be at least 2 times.

https://youtu.be/60PyH9pyJU8

stargazer
Posts: 11
Joined: Mon Nov 05, 2018 1:08 pm

Re: HOVER

Post by stargazer » Thu Nov 08, 2018 10:15 am

Thanks for your help!

DanKnoch
Posts: 20
Joined: Fri Oct 12, 2018 8:38 am

Re: HOVER

Post by DanKnoch » Sat Nov 17, 2018 10:57 pm

It is struggling to lock on to the GPS satellites? If it does not have a good signal, it may be having problems knowing where it is.

Post Reply