H501s calibration

Post Reply
Dealane
Posts: 1
Joined: Sat Oct 27, 2018 1:08 am

H501s calibration

Post by Dealane » Sun Nov 04, 2018 5:39 pm

I just got an H501s and have a calibration question. For some reason I'm not getting the text on the screen to ask for calibration. I get 6-8 satellites on the hand control and 11 satellites on the drone itself. The bottom lights flash 2 green and 2 red. I did try flying it this way and return home does work its just not that accurate. I did rebind the drone to the hand control a few times to see if that changed anything but it didn't.

Does anyone have any idea what is going on?

Thanks,
Samantha

JBSAN
Posts: 1
Joined: Mon Nov 12, 2018 2:37 pm

Re: H501s calibration

Post by JBSAN » Mon Nov 12, 2018 2:43 pm

What is your firmware versions for Flight Control, RX, and transmitter ?

DanKnoch
Posts: 20
Joined: Fri Oct 12, 2018 8:38 am

Re: H501s calibration

Post by DanKnoch » Mon Nov 12, 2018 9:16 pm

If its new, you probably have the new compass. It does not require calibration like the old one. Check your firmware to confirm.

Post Reply