Video transmitting problem

Post Reply
niqu1982
Posts: 2
Joined: Tue Sep 04, 2018 4:03 pm

Video transmitting problem

Post by niqu1982 » Tue Sep 04, 2018 4:08 pm

Hi guys and hello I'm new user of hubsan and have problem with my H501s x4 quadcopter.
Video transmission is poor quality after 3-6 secinds after start and then go out away and never come back. I must switch off power, wiat some time and then video is back.

I have video

Any idea ? Send back to seller or.... ??
Top
Knimrod
Posts: 22
Joined: Fri May 25, 2018 10:57 am

Re: Video transmitting problem

Post by Knimrod » Wed Sep 05, 2018 10:40 am

Have you tried changing FPV frequency?
Top
niqu1982
Posts: 2
Joined: Tue Sep 04, 2018 4:03 pm

Re: Video transmitting problem

Post by niqu1982 » Wed Sep 05, 2018 3:09 pm

If i change freq then i don't have any video.

[youtube]https://www.youtube.com/watch?v=_JVCNGTWYaU[/youtube]
Top
justjarhead
Posts: 334
Joined: Sat Jun 30, 2018 12:45 pm
Location: Elgin, IL USA

Re: Video transmitting problem

Post by justjarhead » Fri Sep 07, 2018 8:56 am

Try reading the Back to Basics on FaceBook for more guidance @Facebook user @Hubsan001 for this and other Hubsan info.

You will see Anne from Hubsan, stop the video and click continue to get to whole list of Hubsan tips.

Here are the ones on FPV
https://www.facebook.com/hubsan001/posts/1795789910726024
https://www.facebook.com/hubsan001/posts/1796671740637841
Top
Post Reply

Return to “FPV section discussion”