You can at least enter binding mode on your H906A. Are you saying that you're able to enter but the binding is not occurring when you power the aircraft on, or are you under the impression that you can't enter binding mode to begin with?
hubsan fpv1 transmitter black screen
-
- Posts: 43
- Joined: Thu May 17, 2018 1:41 pm
Re: hubsan fpv1 transmitter black screen
Re: hubsan fpv1 transmitter black screen
Hi Anne!
Here is a video on which the drone is. I press the enter button, it switches on but there is no binding mode.
Sincerely: Gábor
Here is a video on which the drone is. I press the enter button, it switches on but there is no binding mode.
Sincerely: Gábor
-
- Posts: 43
- Joined: Thu May 17, 2018 1:41 pm
Re: hubsan fpv1 transmitter black screen
Take a photo of the transmitter's QR code and post it. It looks like you might have an H109S version of the H906A...and that you just need to hold the Enter key down first before powering the transmitter on.
Re: hubsan fpv1 transmitter black screen
H501S-H SN:BAH070D29030471
Hi Anne!
This is under the QR code. I can not attach a photo, so it will not let my phone.
What I can do: - turn it on (black picture with volt meter)
Stick calibration (no finalization)
Upgrade mode.
A standard transmitter works with the drone.
Best regards: Gabor
Hi Anne!
This is under the QR code. I can not attach a photo, so it will not let my phone.
What I can do: - turn it on (black picture with volt meter)
Stick calibration (no finalization)
Upgrade mode.
A standard transmitter works with the drone.
Best regards: Gabor