Hubsan Zino Pro+ Baterry 100%
-
- Posts: 4
- Joined: Sun Jan 15, 2023 3:32 pm
Hubsan Zino Pro+ Baterry 100%
Hi everyone! Who faced the problem on Hubsan Zino Pro + / on the phone screen, in the application, the battery always shows 100%, never drops? Reflashed - did not help.
Re: Hubsan Zino Pro+ Baterry 100%
With my two batteries the percentage displayed is correct. Completely drain the battery and recharge it.
Otherwise it is the drone that has a problem.
At HUBSAN there is no longer any after-sales service.
Damage
Otherwise it is the drone that has a problem.
At HUBSAN there is no longer any after-sales service.
Damage
-
- Posts: 4
- Joined: Sun Jan 15, 2023 3:32 pm
Re: Hubsan Zino Pro+ Baterry 100%
And how to unload? On the drone itself or in another way? Thank you!
Re: Hubsan Zino Pro+ Baterry 100%
Yes. Leave the battery on the drone and power up the drone.
You can also make it take off, with the automatic mode but the drone must be able to know the state of charge to land it on its own.
You can also make it take off, with the automatic mode but the drone must be able to know the state of charge to land it on its own.
-
- Posts: 4
- Joined: Sun Jan 15, 2023 3:32 pm
Re: Hubsan Zino Pro+ Baterry 100%
What I haven't done yet: I've flashed the drone, bought a new battery (thought it was the problem), and soldered a new power board for the battery (ordered from AliExpress). But it always shows 100%.
Re: Hubsan Zino Pro+ Baterry 100%
Surely the drone that has a problem.
I had fast discharge issues with the latest firmware.
Try contacting hubsan support.
I had fast discharge issues with the latest firmware.
Try contacting hubsan support.
-
- Posts: 4
- Joined: Sun Jan 15, 2023 3:32 pm
Re: Hubsan Zino Pro+ Baterry 100%
Thank you! I'll try