Pro+ 0x2000 gimbal error

slackpatrol
Posts: 1
Joined: Sat Dec 26, 2020 12:40 pm

Pro+ 0x2000 gimbal error

Post by slackpatrol » Sat Dec 26, 2020 12:51 pm

Hello all, I have a new Pro+ and we're getting this error. I've done all firmware upgrades. From the support sight looks like this may be common, and has to do with the ribbon cable getting unplugged or failing. I'm about to take it apart to investigate. Any advice before I dive in? I sure hope I can get the gimbal working, I'd really like to see some video from this drone!

Tracy
Posts: 1
Joined: Wed Dec 30, 2020 12:08 pm

Re: Pro+ 0x2000 gimbal error

Post by Tracy » Wed Dec 30, 2020 12:16 pm

Hi, I am having the same problem, on first start up we had the Gimble error. We reset everything and it went away, we flew it for a short time. Next day we had the error same thing, turned it all of and on again and flew it for a short while. The 3rd day it refused all attempts to remove the error and the gimble was just unable to move around so 2 mins of footage of the grass! Its brand new and they are the first flights with it. I am thinking of returning it, but if its an easy fix we may have a go, so I hope anyone reading this will help us out :-)

fabiomoritz
Posts: 1
Joined: Fri Jan 08, 2021 1:28 pm

Re: Pro+ 0x2000 gimbal error

Post by fabiomoritz » Fri Jan 08, 2021 1:30 pm

Hi there....exact the same issue as this 2 previous post. Waiting for a fix guide form Hubsan or will return the quad and by a DJI.

me_4aa68GbkSf
Posts: 2
Joined: Tue Dec 29, 2020 5:26 pm

Re: Pro+ 0x2000 gimbal error

Post by me_4aa68GbkSf » Wed Jan 13, 2021 2:07 am

I'm having the same issue any joy with this problem would be much appreciated 👍👍

me_cb66e4VVjY
Posts: 1
Joined: Sat Jan 30, 2021 3:21 pm

Re: Pro+ 0x2000 gimbal error

Post by me_cb66e4VVjY » Sat Jan 30, 2021 3:22 pm

I have the same error in my new drone

me_67021aLpVN
Posts: 1
Joined: Mon Feb 15, 2021 6:50 pm

Re: Pro+ 0x2000 gimbal error

Post by me_67021aLpVN » Wed Feb 17, 2021 8:46 am

Hey. I'm having the exact same problem as well. Kinda sucks. Thinking about returning it as well if I can't get feedback from support or help here. :o

Albertotoro05
Posts: 1
Joined: Fri Jan 22, 2021 8:05 pm

Re: Pro+ 0x2000 gimbal error

Post by Albertotoro05 » Fri Feb 26, 2021 9:45 pm

Hello,

I just receive the zino pro plus and have the same problem, the gimbal never works, I don’t now if hubsan will refund my money

me_2c6damxW92
Posts: 1
Joined: Fri Mar 05, 2021 10:35 pm

Re: Pro+ 0x2000 gimbal error

Post by me_2c6damxW92 » Mon Mar 15, 2021 6:52 am

I’m having the same problem does anybody know how to fix? I re calibrate it but still pops up a gimbal error.

flitchman
Posts: 1
Joined: Tue Mar 16, 2021 5:13 pm

Re: Pro+ 0x2000 gimbal error

Post by flitchman » Tue Mar 16, 2021 5:17 pm

I have the same issue now. Used the drone probably 8-10 times. I don't particularly want to start stripping a new drone down and voiding the warranty. I'll drop Amazon an note and see if I can get a refund if I don't get a response from Hubsan.

me_b4749OpFaU
Posts: 10
Joined: Tue Feb 16, 2021 1:17 pm

Re: Pro+ 0x2000 gimbal error

Post by me_b4749OpFaU » Tue Mar 16, 2021 8:14 pm

I've flown my Pro Plus about 12-15 times. I did get a gimbal error 4-5 times but powering off and on seemed to take care of it but it seems odd that it happens pretty frequently like that.

The weather has not been that good (windy some days and other days still 30 degrees (Here in the Eastern U.S - Pennsylvania). I may have to fly it a bit more to make sure I'm not having the same issues).

Post Reply