Like an idiot I received my Zino 2+, unboxed it, calibrated it and was almost ready to fly when I clicked the firmware upgrade button. Long story short, the upgrade failed at 75%. Now I am forced to upgrade via USB. The problem I have encountered now is that the video upgrade button will not depress and power up the drone. What the hell???!!!
Has anyone else encountered this? Am I now forced to do a factory reset?
Zino 2+ Upgrade
-
- Posts: 1
- Joined: Wed Dec 23, 2020 3:12 am
Re: Zino 2+ Upgrade
I'm also is upgrade failed at 83%.
-
- Posts: 4
- Joined: Sat Dec 26, 2020 6:57 pm
Re: Zino 2+ Upgrade
Wow that sucks.
Unboxed mine upgrade required. No sd card msg.
Inserted good sd card upgrade 100%.
Sd card was a scan disk extreme pro 400gb.
Unboxed mine upgrade required. No sd card msg.
Inserted good sd card upgrade 100%.
Sd card was a scan disk extreme pro 400gb.
Danny
-
- Posts: 1
- Joined: Thu Feb 04, 2021 2:40 pm
Re: Zino 2+ Upgrade
Any progress for it problem?
I'm also is upgrade failed.
I'm also is upgrade failed.
Re: Zino 2+ Upgrade
i have same problem with it
check this video
https://www.youtube.com/watch?v=xbvQc-jPK_w
I dont understand very hard for upgrade firmware, WTF.
& Slow respon support from hubsan, very very disappointed with this drone Zino 2 Plus
check this video
https://www.youtube.com/watch?v=xbvQc-jPK_w
I dont understand very hard for upgrade firmware, WTF.
& Slow respon support from hubsan, very very disappointed with this drone Zino 2 Plus
-
- Posts: 1
- Joined: Sat Feb 13, 2021 10:50 am
Re: Zino 2+ Upgrade
Same problem with ZINO 2+
First time I turn on App and connect Phone, I got message About firmware update. Than I Download firmware, plug in memory card (128gb U3) and Press update. Aupdate was in proces after few minutes nothing happening.. App got stuck.... Now the controler (transmiter) wont connect drone and Phone.. What to do now? Is there any help? O havent fly this new drone yet
First time I turn on App and connect Phone, I got message About firmware update. Than I Download firmware, plug in memory card (128gb U3) and Press update. Aupdate was in proces after few minutes nothing happening.. App got stuck.... Now the controler (transmiter) wont connect drone and Phone.. What to do now? Is there any help? O havent fly this new drone yet
Re: Zino 2+ Upgrade
Per the update instructions you can only use a newly formatted 32gb card. the instructions are in the firmware tutorial. Follow the instructions and you will have success
-
- Posts: 30
- Joined: Fri Feb 26, 2021 3:26 pm
Re: Zino 2+ Upgrade
Card must be formated in FAT32 and not in extFAT ( usualy for card > 32GB).