lost, found, luckily or not

Post Reply
Posts: 1
Joined: Fri Jan 25, 2019 9:01 am
Location: Holland Castricum

lost, found, luckily or not

Post by me_6b2b5MFiPJ » Sun Jan 27, 2019 4:16 am

I lost my Zino.

Everything was going well.
Then I pressed the RTH button.
The Zino passed the point were it should land by 20 meters. Because of the wind??
Then is wend away with 70 km/h
I stopped the RTH and tried to return myself.
Well long story short the Zino was gone.
2 hours later the bell ring.
They brought back my drone. :D :D :D :D :D :D :D :D
Now when I start it I get no connection.
After a while the blue LED's from the drone flash 2 times.
I don't see any WiFi on the 5.4Ghz.
Also at the start up the camera is not moving at all.

Is there any solution?

Why is the Zino not turning after it passes the RTH point?
Greetings Robert-Jan (Holland)

Posts: 15
Joined: Tue Jan 22, 2019 3:07 pm

Re: lost, found, luckily or not

Post by me_8b6feMbB27 » Sun Jan 27, 2019 5:23 am

RTH is bugged.

I crashed my zino similiar way. Clicked rth button instead auto land. Did it twice cause i got confused why drone isnt auto landing but ascending and flying somewhere by itself (it was rth, but i didnt notice) so i pressed rth one more time (thinking its auto land). Then drone flew away itself into net and crashed. Lucky nothing broke. Be careful with rth

Posts: 1027
Joined: Mon Apr 16, 2018 10:43 pm

Re: lost, found, luckily or not

Post by Hubsan-Ailsa » Mon Jan 28, 2019 7:09 am

Hello me_6b2b5MFiPJ,

As your description of the Zino lost,will optimize the Zino wind resistance and auto land reminding.

I email you for further camera issue.

Post Reply