iPad Accommodations?

irussphone · Post by **irussphone** » Thu Jan 17, 2019 10:10 am

Has anyone come up with a way to adapt an iPad for use with the Zino?
I sure would like to see it if you do!

fb_43b9ftbKWM · Post by **fb_43b9ftbKWM** » Thu Jan 17, 2019 11:39 am

https://forum.hubsan.com/viewtopic.php?f=13&t=1437

That's for an iPad mini, but it should be possible to make something similar for the larger iPad.

lexdave1980 · Post by **lexdave1980** » Thu Jan 17, 2019 11:54 am

Are you referring to the iPad being too large to fit?
I wanted to use my Huawei T3 7" MediaPad, but it was too large. I found a thin, cheap cover for the MediaPad, used a little flooring sample found at home improvement and flooring stores as a spacer, and attached the sample to the back of the cover, using Command strips. What to use as a spacer or how permanently you want to attach it is up to the user; I found the free flooring sample and Command strips to work just fine, as shown in these photos. This will work for 7 and 8 inch pads; I'm not sure about bigger items. The controller clips onto the spacer, with the pad stuck on top.

: DSCN0128.JPG (76.89 KiB) Viewed 3027 times

: DSCN0129.JPG (76.68 KiB) Viewed 3027 times

: DSCN0130.JPG (76.11 KiB) Viewed 3027 times

Magnum1956PMQ · Post by **Magnum1956PMQ** » Thu Jan 17, 2019 12:11 pm

Ca va être trop fatiguant d'avoir le déport de la tablette pour les poignets

Voir ma solution en 3D fichier STL

Code: Select all

https://forum.hubsan.com/viewtopic.php?f=13&t=1437 /code]

lexdave1980 · Post by **lexdave1980** » Thu Jan 17, 2019 1:27 pm

No, it's light enough for the wrists, and you can see all the controls.
Notice how you hold the controller with the pad attached. This is an inexpensive solution, and works for smaller pads, not for 25cm/10" or larger pads. In those cases, go with your idea.
Now, if you have small hands or weak wrists, well, I can't help you there.

: DSCN0131.JPG (76.11 KiB) Viewed 3012 times

irussphone · Post by **irussphone** » Thu Jan 17, 2019 4:17 pm

Nice! Very creative!!!

irussphone · Post by **irussphone** » Fri Jan 18, 2019 11:10 pm

Got a new, refurbished ipad mini 2 to go with the Zino. that should help my old vision

me_fa036eEZef · Post by **me_fa036eEZef** » Sat Jan 19, 2019 7:52 am

€ 4,20 12%de DESCUENTO | 360 grados giratorio soporte extendido soporte 4-12in teléfono Tablet para DJI chispa y Mavic 2 Pro Zoom/ aire Control remoto
https://s.click.aliexpress.com/e/b3FaMHPF

knet · Post by **knet** » Sat Jan 19, 2019 11:15 am

Greekbuying $ 13.98
Phone Tablet Holder Clamp Bracket for DJI Mavic Pro DJI Spark Remote Controller

Now I need a correct and longer Otg cable.
Any ideas?

Ahora necesito un cable Otg correcto y mas largo.
Alguna idea?

irussphone · Post by **irussphone** » Sun Jan 20, 2019 9:20 pm

Thanks!

I found the same thing on Amazon:
https://www.amazon.com/gp/product/B01N5KIXG9/ref=ask_ql_qh_dp_hza

Plus I ordered a 1 foot long mini-usb to lightning connector for longer distance between the tx and tablet.

Hubsan Official Forum

iPad Accommodations?

iPad Accommodations?

Re: iPad Accommodations?

Re: iPad Accommodations?

Re: iPad Accommodations?

Re: iPad Accommodations?

Re: iPad Accommodations?

Got an old ipad mini 2

Re: iPad Accommodations?

Re: iPad Accommodations?

Re: iPad Accommodations?