battery life

peterkng
Posts: 104
Joined: Wed Oct 03, 2018 2:40 am

Re: battery life

Post by peterkng » Fri Dec 28, 2018 6:57 pm

isldoors wrote:
Fri Dec 28, 2018 6:06 pm
Hi what type of battery and what is the voltage in the Zino tx.😀
3000mah 3s LIHV full charge is 13.05V

me_fa036eEZef
Posts: 42
Joined: Mon Nov 26, 2018 5:32 pm

Re: battery life

Post by me_fa036eEZef » Thu Jan 03, 2019 4:20 am

How long is the battery last?
I have about 4 cycles and I can not get more than 15-16 min.

Hubsan-Ailsa
Posts: 1027
Joined: Mon Apr 16, 2018 10:43 pm

Re: battery life

Post by Hubsan-Ailsa » Thu Jan 03, 2019 6:47 am

Hello,

The Zino transmitter battery :18650 Li-ion 2600mAh.

Djose24
Posts: 82
Joined: Thu Nov 15, 2018 6:53 pm

Re: battery life

Post by Djose24 » Thu Jan 03, 2019 9:00 am

me_fa036eEZef wrote:
Thu Jan 03, 2019 4:20 am
How long is the battery last?
I have about 4 cycles and I can not get more than 15-16 min.
In what percentage is the Zino battery left when you land? Thank you

me_fa036eEZef
Posts: 42
Joined: Mon Nov 26, 2018 5:32 pm

Re: battery life

Post by me_fa036eEZef » Fri Jan 04, 2019 9:02 am

Al 20%.

La verdad es que no me están durando mucho todavía.

El otro día solo 13min pero es que hacía 4-5 grados y eso es malísimo.
Pero lo máximo que he sacado son unos 17.

Magnum1956PMQ
Posts: 95
Joined: Wed Oct 10, 2018 5:42 am

Re: battery life

Post by Magnum1956PMQ » Sat Jan 05, 2019 12:21 pm

The batteries are LIVs at 4.35v / cell. The Hubsan charger charges at 4.30 / 4.32. I complete my load with a ULTIMATE PRO 10 charger up to 4.35 v with a perfect balance between the cells. I have made 92 flights to date, about 25 to 30 refills, the flight time at 20 ° is 23 minutes. At 4 ° it is between 17 and 19 minutes.

Image
IMG_2430.JPG
IMG_2430.JPG (2.33 MiB) Viewed 11731 times
IMG_2429.JPG
IMG_2429.JPG (2.1 MiB) Viewed 11731 times
Attachments
IMG_2431.JPG
IMG_2431.JPG (2.8 MiB) Viewed 11731 times

me_b0efeuY4F5
Posts: 4
Joined: Wed Jan 09, 2019 4:19 pm

Re: battery life

Post by me_b0efeuY4F5 » Mon Jan 14, 2019 5:55 am

hola, yo tengo B6AC 80W , ¿en que posición lo pones para cargar esa batería? ¿en lipo? ¿hay que tocar algún parámetro para que llegue a los 4,35v? ¿si es así me lo parias indicar? las lipos normales solo admiten 4,20v como máximo , ¿ese voltaje de 4,35v es el correcto para esa batería ?
un saludo y gracias

Andrew2007
Posts: 9
Joined: Fri Apr 20, 2018 3:03 pm

Re: battery life

Post by Andrew2007 » Mon Jan 14, 2019 7:50 am

Controller battery.
Attachments
Screenshot_20190111-112018.png
Screenshot_20190111-112018.png (2.23 MiB) Viewed 11681 times

Andrew2007
Posts: 9
Joined: Fri Apr 20, 2018 3:03 pm

Re: battery life

Post by Andrew2007 » Mon Jan 14, 2019 7:56 am

The Zino battery is a LiHV 3S 3000mah, max charge for each cell is 4.35V

The Imax B6 with firmware 1.13 will charge LiHV batteries as there is a setting for this battery type.

Gregory
Posts: 35
Joined: Fri Oct 26, 2018 6:41 pm

Re: battery life

Post by Gregory » Mon Jan 14, 2019 11:40 am

No need to modify your charge cable just get this already made ballance extension for 5.97 + shipping at Amazon.
ProgressiveRC
3S JST-XH Charge & Balance Cable https://www.amazon.com/dp/B00UY2Q23I/ref=cm_sw_r_cp_apa_i_P6kpCbRPZE726
Attachments
Screenshot_20190114-100040~2.png
Screenshot_20190114-100040~2.png (230.78 KiB) Viewed 11668 times

Post Reply