Hubsan zino pro plus Firmware ERROR(((

Post Reply
knox
Posts: 2
Joined: Tue Apr 27, 2021 1:19 pm
Location: Russia

Hubsan zino pro plus Firmware ERROR(((

Post by knox » Tue Apr 27, 2021 1:58 pm

Всем привет.
Запускаю свой Zino pro plus и там нет изображения, но все остальное работало.
Решил прошить возможно слетела прошивка. Загружаю прошивку с сайта и после прошивки уже ничего не работает.
Прошивал несколько раз, эффекта нет... как восстановить заводские настройки???
Скриншоты явно показывают, что прошивка не прошивается и ZIno pro plus не рабочий.
Пульт не прошивал. Прошивал камеру, сам дрон и стабилизатор.
Я налетал максимум 20 циклов аккумулятора и вот такие проблемы.
Прошивку делал по этому видео https://youtu.be/2s7VyxN6eYw

Помогите, что делать с квадрокоптером??? неужели он кирпич...(((

Hello everyone.
I launch my Zino pro plus and there is no image there, but everything else worked.
I decided to flash the firmware. I download the firmware from the site and after the firmware nothing works anymore.
I stitched several times, there is no effect ... how to restore factory settings ???
The screenshots clearly show that the firmware is not flashed and the ZIno pro plus is not working.
The remote control was not flashed. I flashed the camera, the drone itself and the stabilizer.
I have flown a maximum of 20 battery cycles and these are the problems.
I made the firmware for this video https://youtu.be/2s7VyxN6eYw

Help, what to do with the quadcopter ??? is he really a brick ... (((
Attachments
Screenshot_2021-04-24-18-05-32-738_com.hubsan.drone.jpg
Screenshot_2021-04-24-18-05-32-738_com.hubsan.drone.jpg (316.52 KiB) Viewed 4926 times
Screenshot_2021-04-26-00-34-59-840_com.hubsan.drone.jpg
Screenshot_2021-04-26-00-34-59-840_com.hubsan.drone.jpg (355.83 KiB) Viewed 4926 times
Screenshot_2021-04-24-18-07-28-824_com.hubsan.drone.jpg
Screenshot_2021-04-24-18-07-28-824_com.hubsan.drone.jpg (449.98 KiB) Viewed 4926 times
Screenshot_2021-04-24-18-05-25-294_com.hubsan.drone.jpg
Screenshot_2021-04-24-18-05-25-294_com.hubsan.drone.jpg (188.62 KiB) Viewed 4926 times
Screenshot_2021-04-24-16-27-48-667_com.hubsan.drone.jpg
Screenshot_2021-04-24-16-27-48-667_com.hubsan.drone.jpg (273.49 KiB) Viewed 4926 times
hubsan zino pro plus

knox
Posts: 2
Joined: Tue Apr 27, 2021 1:19 pm
Location: Russia

Re: Hubsan zino pro plus Firmware ERROR(((

Post by knox » Wed Apr 28, 2021 11:07 pm

help me!!!
hubsan zino pro plus

me_89e84evv8w
Posts: 3
Joined: Wed May 05, 2021 3:05 am

Re: Hubsan zino pro plus Firmware ERROR(((

Post by me_89e84evv8w » Thu May 06, 2021 12:55 pm


me_89e84evv8w
Posts: 3
Joined: Wed May 05, 2021 3:05 am

Re: Hubsan zino pro plus Firmware ERROR(((

Post by me_89e84evv8w » Thu May 06, 2021 12:58 pm


me_89e84evv8w
Posts: 3
Joined: Wed May 05, 2021 3:05 am

Re: Hubsan zino pro plus Firmware ERROR(((

Post by me_89e84evv8w » Thu May 06, 2021 12:59 pm


Post Reply