Всем привет.
Запускаю свой Zino pro plus и там нет изображения, но все остальное работало.
Решил прошить возможно слетела прошивка. Загружаю прошивку с сайта и после прошивки уже ничего не работает.
Прошивал несколько раз, эффекта нет... как восстановить заводские настройки???
Скриншоты явно показывают, что прошивка не прошивается и ZIno pro plus не рабочий.
Пульт не прошивал. Прошивал камеру, сам дрон и стабилизатор.
Я налетал максимум 20 циклов аккумулятора и вот такие проблемы.
Прошивку делал по этому видео https://youtu.be/2s7VyxN6eYw
Помогите, что делать с квадрокоптером??? неужели он кирпич...(((
Hello everyone.
I launch my Zino pro plus and there is no image there, but everything else worked.
I decided to flash the firmware. I download the firmware from the site and after the firmware nothing works anymore.
I stitched several times, there is no effect ... how to restore factory settings ???
The screenshots clearly show that the firmware is not flashed and the ZIno pro plus is not working.
The remote control was not flashed. I flashed the camera, the drone itself and the stabilizer.
I have flown a maximum of 20 battery cycles and these are the problems.
I made the firmware for this video https://youtu.be/2s7VyxN6eYw
Help, what to do with the quadcopter ??? is he really a brick ... (((
Hubsan zino pro plus Firmware ERROR(((
Hubsan zino pro plus Firmware ERROR(((
- Attachments
-
- Screenshot_2021-04-24-18-05-32-738_com.hubsan.drone.jpg (316.52 KiB) Viewed 9196 times
-
- Screenshot_2021-04-26-00-34-59-840_com.hubsan.drone.jpg (355.83 KiB) Viewed 9196 times
-
- Screenshot_2021-04-24-18-07-28-824_com.hubsan.drone.jpg (449.98 KiB) Viewed 9196 times
-
- Screenshot_2021-04-24-18-05-25-294_com.hubsan.drone.jpg (188.62 KiB) Viewed 9196 times
-
- Screenshot_2021-04-24-16-27-48-667_com.hubsan.drone.jpg (273.49 KiB) Viewed 9196 times
hubsan zino pro plus
-
- Posts: 3
- Joined: Wed May 05, 2021 3:05 am
-
- Posts: 3
- Joined: Wed May 05, 2021 3:05 am
-
- Posts: 3
- Joined: Wed May 05, 2021 3:05 am