H501SS upgraded to FC V1.1.46 - Mod Tool for FC parameters

Post Reply
Moguntia
Posts: 6
Joined: Sun Jan 13, 2019 5:34 pm
Location: San Juan Capistrano, CA

H501SS upgraded to FC V1.1.46 - Mod Tool for FC parameters

Post by Moguntia » Wed Jan 16, 2019 11:24 pm

Upgraded my 501ss to the latest FW for FC and RX.
Upgrade went without problem and the 501ss is flying.

What I'm missing now is the ability to make changes to the FC parameters such as heights restriction or RTH speed.
All tools I have on hand are rejecting the latest version.

Any suggestions or solutions out there ?

lukappaseidue
Posts: 3
Joined: Thu Jan 17, 2019 11:50 am

Re: H501SS upgraded to FC V1.1.46 - Mod Tool for FC parameters

Post by lukappaseidue » Thu Jan 17, 2019 11:55 am

Here you can find all that you need
even latest FC modding tool for latest FW FC 1.1.46 version
https://goo.gl/1Nhvqx

Moguntia
Posts: 6
Joined: Sun Jan 13, 2019 5:34 pm
Location: San Juan Capistrano, CA

Re: H501SS upgraded to FC V1.1.46 - Mod Tool for FC parameters

Post by Moguntia » Sun Jan 27, 2019 12:04 am

Thanks for the link - all good files.
I have now installed the latest F/W ( downloaded from Hubsan.com )
used the modding tool to set the wished parameters.

Not connected to the upgrades and adjustments - had fatal crash and will cover some thoughts and questions in the repair section.

User avatar
Zieney
Posts: 3
Joined: Wed Jun 20, 2018 1:11 am
Location: Frankfurt/Main

Re: H501SS upgraded to FC V1.1.46 - Mod Tool for FC parameters

Post by Zieney » Thu Jan 31, 2019 8:17 am

Hallo Alisa, grüße dich,
zuerst zu mir, mein Hubsan ist ein H501SS : RX-V2.1.29 - FC-V1.1.41 / FPV1 H906A : TX-V1.1.16.
mit der manuellen Kompass-Kalibrierung, nicht die Automatische. Er fliegt super und es ist alles in Ordnung,
er ist 9 Monate alt, altes 501SS System, keine automatische Kompass-Kalibrierung.
Jetzt zu meinen Fragen: Es wird auf der Hubsan Seite ein Update für den 501SS angeboten,

1. Frage: Camera Firmware H501SS (H501S-S C-C), macht es Sinn meinen 501SS (ALT) ein Update zu machen,
und was wird sich verändern, oder besser geworden.

2. Frage: H906A TX-1.1.16 gibt es auch ein Update dafür, das neue TX Advanced V1.1.17, was ist der Unterschied
zwischen der .16 und der .17, und macht es Sinn ein Update zu machen.

3. Frage: FC V1.1.46 Update, ich habe die FC-V1.1.41, was ist der Unterschied und macht es Sinn ein Update zu machen.

4. Frage: RX V2.1.50 Update, ich habe die RX-V2.1.29, was ist der Unterschied und macht es Sinn ein Update zu machen.

Bedenke bitte dass ich das alte Modell 501SS habe.
Ich bedanke mich schon im voeraus für deine Antwort.

Viele Grüße aus Frankfurt am Main / Deutschland
Sidney


Hello Alisa, greet you,
first to me, my Hubsan is a H501SS: RX-V2.1.29 - FC-V1.1.41 / FPV1 H906A: TX-V1.1.16.
with the manual compass calibration, not the automatic. He flies super and it's all right, he's 9 months old, old 501SS system,
no automatic compass calibration.
Now to my questions: It is offered on the Hubsan side an update for the 501SS,

Question 1: Camera firmware H501SS (H501S-S C-C), does it make sense to update my 501SS (ALT), and what will change,
or become better.

2. Question: H906A TX-1.1.16 also has an update for this, the new TX Advanced V1.1.17, what's the difference between
the .16 and the .17, and it makes sense to make an update.

Question 3: FC V1.1.46 Update, I have the FC-V1.1.41, what's the difference and it makes sense to make an update.

4. Question: RX V2.1.50 update, I have the RX-V2.1.29, what's the difference and makes sense to make an update.

Please remember that I have the old model 501SS.
I thank you in advance for your answer.

Greetings from Frankfurt am Main / Germany

Sidney

Post Reply