Hubsan Official Forum

OK.. so with altitude hold, the barometric sensor holds a constant elevation in the z axis, but I can freely fly around with the sticks in the horizontal x,y axis unless I purposely change elevation with the left stick again to a new altitude? And, furthermore, the craft will drift in the last dire...

Thanks. I thought altitude hold was GPS mode. Doesn't altitude hold require GPS being on? No. Altitude hold only maintains a given altitude according to its internal barometric pressure sensor. GPS mode maintains a given position based upon its measured GPS coordinates. In GPS mode, you fly around ...

Looks like the pin has broken off or pushed in. The good news is it's a cheap and easy fix with a mini-pci to rp-sma pigtail. Not sure of the length you need but this should work: https://www.amazon.com/U-FL-RP-SMA-Pigtail-Antenna-Cable/dp/B005UWD0EG

Good luck!

Chris has been nothing but helpful to me and many others. Hubsan is lucky to have him on their team. You, on the other hand, have serious issues. From the mod team: the below post does not apply to your comment; the only reason your post shows at the top of this thread now is that the other content ...

The compass sensor,Flight Controller board ,landing gear is the same. The difference of the old main board and new main board is the component position and the Circuit configuration . But in an earlier reply on this thread you asked if the OP wanted the "new compass number"? We need absolute clarit...

I see the HS001+HV002 goggles for $45. but is that the same as the HS002?

If the drone does not have a real time clock (it doesn't), how would it know what to date/timestamp the video files? I always rename my video files when transferring to indicate correct date.

The compass sensor,Flight Controller board ,landing gear is the same. The difference of the old main board and new main board is the component position and the Circuit configuration . Thanks. So, If I buy a H109S-62 Crash Pack, I'm good for early and later versions? Frame is compatible with RR comp...

The compass sensor,Flight Controller board ,landing gear is the same. The difference of the old main board and new main board is the component position and the Circuit configuration . Thanks. So, If I buy a H109S-62 Crash Pack, I'm good for early and later versions? Frame is compatible with RR comp...

Hubsan-Ailsa wrote: ↑

Thu Jun 21, 2018 1:58 am

The difference of the H109S with right rear compass and left front compass is the firmware.
The main board is the same.

Thanks Ailsa.. What parts are different?
The frame?
The compass sensor?
Flight Controller board?
Landing gear?