Search found 130 matches
- Wed Jan 30, 2019 6:47 pm
- Forum: Zino
- Topic: Zino "disconnects" the root cause?
- Replies: 14
- Views: 5620
Re: Zino "disconnects" the root cause?
With my first zino which was sent for inspection , had disconnect issues but each time drone triggered auto return. There was no consistency as at the same site I got disconnection sometimes, sometimes it doesn't. Only thing I noticed with consistency was distance above 100 m. On contacting hubsan ...
- Wed Jan 30, 2019 5:59 pm
- Forum: Zino
- Topic: Zino "disconnects" the root cause?
- Replies: 14
- Views: 5620
Re: Zino "disconnects" the root cause?
The zino wifi signal is visible on the analyzer? No. Because this is a screen shot off my phone. I live in europe where mobile devices do not generally have any access to Band C. This is the point I'm trying to make :) There is generally no traffic in Band C in europe, whereas in other parts of the...
- Wed Jan 30, 2019 5:50 pm
- Forum: Zino
- Topic: Drone battery charge time?
- Replies: 22
- Views: 8319
Re: Drone battery charge time?
I suspect these results are due to a protection circuit inside the battery as it would be a very strange coincidence that all these batteries have such a similar result. Thankyou. I'm going to manually measure the IR once I can get a decent connector to support a high current load. I feel like a di...
- Wed Jan 30, 2019 1:00 pm
- Forum: Zino
- Topic: Zino "disconnects" the root cause?
- Replies: 14
- Views: 5620
Re: Zino "disconnects" the root cause?
Thanks for the response. It does however raise another issue, which came to light also in the FB responses. Is this really a "disconnect" in terms of loss of the network between quad and controller? The reason I ask is from your description. Your quad flew off. That is NOT a condition you should see...
- Wed Jan 30, 2019 12:48 pm
- Forum: Zino
- Topic: Drone battery charge time?
- Replies: 22
- Views: 8319
Re: Drone battery charge time?
I've asked before, but is anyone prepared to share their Internal Resistance measurements for these packs.
I'm interested in whether I'm just unlucky on getting 3 mediocre batteries
I'm interested in whether I'm just unlucky on getting 3 mediocre batteries
- Wed Jan 30, 2019 9:25 am
- Forum: Zino
- Topic: Zino "disconnects" the root cause?
- Replies: 14
- Views: 5620
Zino "disconnects" the root cause?
OK, those over on FB may have seen my post rom last night. Basically I'm trying to establish (as no one else appaers to be doing anything ;) ), whatthe root cause of disconnects is, how many different causes there are, and wheter we can or cannot do anything abouit them. The two obvious ones are: 1....
- Tue Jan 29, 2019 11:57 am
- Forum: Zino
- Topic: Zino gone forever!
- Replies: 18
- Views: 6607
Re: Zino gone forever!
So if the battery drops by 20%, the zino performs RTH and does not leave from the button of the station (pressing half a second) do nothing ???. If so, you could implement in the firmware that instead of giving 40% notice, that you have the option of 30% in the app with the options to return automa...
- Tue Jan 29, 2019 8:52 am
- Forum: Zino
- Topic: Zino gone forever!
- Replies: 18
- Views: 6607
Re: Zino gone forever!
To cancel the LV failsafe RTH, you need press the RTH icon on the controller. . lv rth.png . It then will ask if you want to cancel, OK or Cancel. . rth cancel.png . Don't press cancel as I did the first time because I didn't read the message ;) Touching "OK" will abort the RTH. Saying that, there i...
- Tue Jan 29, 2019 8:27 am
- Forum: Zino
- Topic: Quick test new firmware FC V1. 0.47
- Replies: 1
- Views: 1234
Re: Quick test new firmware FC V1. 0.47
I've tested it too.
I do NOT like it at all.
I will give it another hour, and then it comes off and 1.0.46 is going back on again.
It only appears to have fixed one small issue and made things worse overall
I do NOT like it at all.
I will give it another hour, and then it comes off and 1.0.46 is going back on again.
It only appears to have fixed one small issue and made things worse overall
- Mon Jan 28, 2019 6:17 pm
- Forum: Zino
- Topic: Sport mode is not working!
- Replies: 8
- Views: 3045
Re: Sport mode is not working!
Sport mode does work.
What doesn't work is "NORMAL" mode.
The rates are always 100%.
They should be more like 60% in normal mode like all other Hubsan offerings.
This would also resolve peoples issue with sensitive controls.
They are after all at 100% all the time....
What doesn't work is "NORMAL" mode.
The rates are always 100%.
They should be more like 60% in normal mode like all other Hubsan offerings.
This would also resolve peoples issue with sensitive controls.
They are after all at 100% all the time....