Search found 11 matches

by eur_c6df6Dc80x
Wed Jan 16, 2019 12:11 pm
Forum: User manual section
Topic: H501S-S firmware upgrade
Replies: 2
Views: 6128

Re: H501S-S firmware upgrade

Bottom of this page.

https://www.hubsan.com/na/index.php?main_page=support
by eur_c6df6Dc80x
Fri Jan 04, 2019 4:00 pm
Forum: FPV section discussion
Topic: GPS data Recovery
Replies: 4
Views: 2044

Re: GPS data Recovery

Hi Bill, The tx display should display the last coordinates until the battery in the tx fails or the tx is switched off........ unless of course the drone gps signal is picked up again and then those new coordinates will be displayed along with the other telemetry details. As for your phone, put on ...
by eur_c6df6Dc80x
Wed Jan 02, 2019 2:47 pm
Forum: FPV section discussion
Topic: GPS data Recovery
Replies: 4
Views: 2044

Re: GPS data Recovery

Unfortunately not. If it lost the 2.4 control signal it should have set off home and headed for its original take off position, that is until it received the tx signal again.... If you had flicked the rth switch then I believe once it came back within range it should have headed for the tx. You dont...
by eur_c6df6Dc80x
Wed Jan 02, 2019 12:22 pm
Forum: User manual section
Topic: Where is the *^$! Owners Manual?
Replies: 2
Views: 5640

Re: Where is the *^$! Owners Manual?

As rhornibrook says go to the Hubsan.com site, look under the support tab and select the model you have then select either the quickstart or User manual for download.

System is quick and efficient. As for firmware and installation tools........ that's something quite different ;-)
by eur_c6df6Dc80x
Wed Jan 02, 2019 12:05 pm
Forum: Repair guide video
Topic: H501S FC Parameters
Replies: 1
Views: 1187

Re: H501S FC Parameters

Sorry, the only setting I have adjusted with the mod tool is the RTH safety height - and I set that to 20m
by eur_c6df6Dc80x
Wed Jan 02, 2019 10:47 am
Forum: Repair guide video
Topic: 501s calibration
Replies: 3
Views: 1763

Re: 501s calibration

The latest 501ss drones have a new compass module which does not require a manual orientation to align the compass for every flight after a battery change. Your FC and RX firmware if checking your transmitter tx) will be around:-

FC-V 1.1.46
RX-V 2.1.50
by eur_c6df6Dc80x
Wed Jan 02, 2019 10:42 am
Forum: Repair guide video
Topic: Video & photo info
Replies: 2
Views: 1365

Re: Video & photo info

For the 501ss quad, changing the date is not possible on the drone and will have to be added / adjusted when you copy the video files from the sd card to your storage medium or pc.

For catalogue purposes you will be giving the video file a meaningful name so just add the date/time to the end :-)
by eur_c6df6Dc80x
Wed Jan 02, 2019 10:39 am
Forum: Repair guide video
Topic: H501s-s maintenance
Replies: 2
Views: 2621

Re: H501s-s maintenance

I have oiled mine with a very light machine oil, but then I did the same with my radio controlled helicopters back in the 80's. a fine dropper (hypodermic ) needle was used. Many folk leave them to run dry but i find my 501ss's noisy. I think a lot depends on how dusty the environment is (take off a...
by eur_c6df6Dc80x
Wed Jan 02, 2019 9:11 am
Forum: FPV section discussion
Topic: just got a H501ss and have a few questions
Replies: 5
Views: 2118

Re: just got a H501ss and have a few questions

Before you start modifying the quad setup, fly it and see if you have any specific limitations. The advantage of the standard tx is that is is all self contained, nothing to catch, forget to screw on and blow your output transistors etc. Do not modify it for the sake of it. You do not mention any FP...
by eur_c6df6Dc80x
Tue Jan 01, 2019 4:56 pm
Forum: FPV section discussion
Topic: H901A vs. H906A range
Replies: 8
Views: 3014

Re: H901A vs. H906A range

Yes, your standard tx will (should) give you more than line of sight in favorable conditions. By 300m its hard to see in most cases especially if you take your eyes off it. ;-) Most radio systems get hit by external influences and your Hubsan will be no different. Ideally do not fly in an urban area...